The Klaviyo flows every Shopify store needs
The six Klaviyo flows every Shopify store should run, with the trigger, timing, filters, and common mistakes for each one.

Campaigns get the attention, but flows do the quiet, steady work. A campaign goes out once, to a list, on the day you choose. A flow runs every day, for every person who does the thing that triggers it: signs up, looks at a product, starts a checkout, buys, or goes quiet.
This is a practical guide to the Klaviyo flows a Shopify store should have running, what each one should say, and the settings that stop them from annoying the people you most want to keep.
Quick answer
The core Klaviyo flows for a Shopify store are:
- Welcome series: triggered when someone joins your list.
- Browse abandonment: triggered when a known visitor views a product and doesn’t buy.
- Abandoned cart and abandoned checkout: triggered when someone adds to cart or starts checkout and doesn’t finish.
- Post-purchase: triggered by a placed (or fulfilled) order.
- Win-back: triggered when a customer hasn’t ordered again in a while.
- Sunset: cleans out subscribers who have stopped engaging, to protect deliverability.
If you’re starting from zero, build them roughly in that order of urgency: welcome, checkout and cart, then browse, post-purchase, win-back, and sunset. More on prioritizing below.
Why flows matter more than you think
Flows reach people when their interest is highest, because the trigger is something they just did. They also compound: a small improvement to a welcome email applies to every new subscriber from that day on.
Flows and campaigns do different jobs, and you need both. Campaigns carry news, launches, and promotions. Flows carry the journey every customer goes through. Most stores that feel stuck on email have campaigns going out every week and flows that were switched on once, years ago, and never touched again.
How Klaviyo flows work, in two minutes
Every flow starts with a trigger:
- List trigger: someone is added to a list (“Added to List”).
- Segment trigger: someone joins a segment.
- Metric trigger: someone does something your store reports to Klaviyo, such as Viewed Product, Started Checkout, or Placed Order from the Shopify integration.
- Date property trigger: a date on the profile, such as a birthday.
From there you add time delays, emails, SMS, and conditional splits. Two settings matter most:
- Flow filters decide who stays in the flow. They’re checked when someone enters and again before every message, so a filter like “Placed Order zero times since starting this flow” removes a shopper the moment they buy.
- Smart Sending skips a message if the person has received one from you recently, within a window you can set. It’s a useful guard against stacking a flow email on top of a campaign.
1. Welcome series
Trigger: Added to List (your newsletter or signup form list).
Timing and length: the first email right away, then three to five more over the next one to two weeks.
What to say: deliver whatever your form promised in the first email, and do it clearly. Then introduce the brand: what you make, why it’s different, your bestsellers, and the proof that matters to a first-time buyer, such as reviews, how shipping and returns work, and how to choose the right product. Save the hard sell for later in the series, once people know who you are.
Filters: “Placed Order zero times since starting this flow,” so new customers move straight into post-purchase instead of being told to buy something they just bought.
Common mistakes: promising a discount on the form and making people hunt for it; leaving Smart Sending on for the first email, so a subscriber who just got a campaign never sees their code; one generic welcome for everyone, when people who join from a quiz or a product page have told you what they want; and a series that ends abruptly, with no hand-off to your regular campaigns.
2. Browse abandonment
Trigger: the Viewed Product metric. This only works for visitors Klaviyo can identify, usually people who have subscribed or clicked through from a Klaviyo email, and it needs Klaviyo’s onsite tracking active on your Shopify store.
Timing and length: one or two messages, the first a few hours after the visit.
What to say: keep it light. “Still thinking about it?” with the product they viewed, a short reason to choose it, and a few related products.
Filters: exclude anyone who has started checkout or placed an order since starting the flow, so they get the more relevant cart or post-purchase message instead. Add a filter so the same person can’t enter again for a set number of days; people browse a lot, and daily reminders get tiresome fast.
Common mistakes: discounting here (it teaches people to browse and wait); no re-entry limit; and a message that reads like surveillance. Keep the tone friendly.
3. Abandoned cart and abandoned checkout
These are often treated as one flow, but they’re two levels of intent.
Abandoned checkout trigger: Started Checkout. Someone has reached checkout and entered their email, then left. This is the highest-intent flow you’ll run.
Abandoned cart trigger: an Added to Cart metric, if your store sends one to Klaviyo. It reaches people who added a product but never reached checkout.
Timing and length: for checkout, the first message within a few hours, then one or two follow-ups over the next few days. For cart, a slightly gentler version of the same.
What to say: a clear picture of what they left, with a direct link back to the checkout or cart. Then answer the questions that usually stop people from buying: shipping costs and times, returns, sizing, payment options, and reviews. If you use an incentive, hold it for a later message rather than the first, and think about whether you want to offer it to repeat abandoners.
Filters: “Placed Order zero times since starting this flow” on both. On the cart flow, also exclude anyone who has started checkout, so they don’t get both. A re-entry limit stops the same shopper getting the series every time they add something.
Common mistakes: sending the first message too late, after the moment has passed; a discount in the first email, which trains customers to abandon on purpose; broken “return to cart” links (test them); and running cart and checkout flows that overlap, so one person gets two parallel series.
4. Post-purchase
Trigger: Placed Order. Some stores also run a second branch from the Fulfilled Order metric, so messages about using the product arrive when it’s actually in hand.
Timing and length: a thank-you soon after the order, then three to five messages over the following weeks, timed to delivery and to when the customer has had time to use the product.
What to say: thank them, set expectations on shipping, and help them get value from what they bought: how to use it, care for it, or get started. Then ask for a review, and later, suggest what to buy next. Use a conditional split to send first-time buyers and repeat customers different messages; someone on their fifth order doesn’t need the brand introduction.
Filters: fewer than other flows, but exclude anyone whose order was cancelled or refunded, if your data allows.
Common mistakes: jumping straight to a cross-sell before the first product has even arrived; asking for a review before delivery; and treating Shopify’s order confirmation and shipping notifications as the whole post-purchase experience.
5. Win-back
Trigger: usually Placed Order with a long time delay, timed to when a customer would normally have bought again, plus a filter that confirms they haven’t. Some stores use a segment trigger instead. If your account has enough order history, Klaviyo’s predictive analytics can estimate when each customer is likely to order next, which helps set the timing.
Timing and length: two to four messages spread over a few weeks, starting at the point where a customer is overdue for their next order. That point depends on what you sell.
What to say: start with what’s new, then a reminder of why they bought in the first place. Save your strongest incentive for the last message.
Filters: “Placed Order zero times since starting this flow,” and exclude anyone who has bought recently.
Common mistakes: using the same timing for every product; leading with the biggest discount; and running win-back for customers who bought once, years ago, with no sign of interest since. That’s what the sunset flow is for.
6. Sunset and list hygiene
Trigger: a segment of subscribers who haven’t opened, clicked, or visited your site in a long time.
Timing and length: one to three messages over a week or two.
What to say: be honest. Ask if they still want to hear from you, make it easy to stay with one click, and offer to send less often if that helps.
What happens next: people who engage stay. People who don’t should be removed from your regular sending, either by excluding them from campaign segments or by suppressing them in Klaviyo.
Common mistakes: skipping this flow because a bigger list feels better. Sending to people who never open hurts your sender reputation, which affects whether your emails reach everyone else’s inbox. Also, don’t rely on opens alone. Apple Mail Privacy Protection can register opens that never happened, so include clicks and site activity when you decide who’s engaged.
Email and SMS in your flows
SMS works best as a supporting channel, not a copy of your emails. Use it for the moments where speed matters most: an abandoned checkout, a delivery update, an early-access reminder. Keep messages short, and add it only for subscribers who have given SMS consent, which Klaviyo records separately from email.
A conditional split by SMS consent lets one flow handle both groups: people with consent get an SMS step, everyone else gets email only. Watch the frequency. Someone receiving an email and a text about the same cart within the hour will feel chased.
Testing your flows
Before anything goes live, set messages to Manual so the flow runs without sending, then check who enters and when. Preview each message with real profiles, click every link, and send tests to the inboxes your customers use.
Once it’s running, use Klaviyo’s built-in A/B testing on flow messages. Test one thing at a time, such as a subject line, an incentive, or the timing of the first message, and give each test enough recipients to mean something. Judge results on orders and revenue per recipient rather than opens.
Then review your flows every quarter: products, offers, and policies change.
Where to start if you have nothing
If you’re starting from scratch, build in this order:
- Welcome series. It catches every new subscriber from day one.
- Abandoned checkout, then abandoned cart. These reach the people closest to buying.
- Browse abandonment. Quick to build once the cart flows exist.
- Post-purchase. This is where repeat purchase starts.
- Win-back and sunset. These matter more as your customer list grows.
A simple version of each, live and filtered properly, is worth more than a perfect version still in draft. Then iterate. For more on how flows fit into the rest of the path from first click to second purchase, read From traffic to revenue: turning Shopify visitors into customers.
How the studio helps
We plan, write, design, and build Klaviyo flows and campaigns inside your own account, so your data, flows, and history stay with you. Senior marketers set the strategy and review every message, and our AI platform, Growth Minds Studio, helps us produce copy and design in your brand voice at the pace a full flow program needs. Flows are part of every plan; a flow of about five emails uses roughly 90k AI tokens from your plan’s AI credits (see the AI usage guide).
Growth Minds is backed by Great Minds, an official Klaviyo partner. See what we do in Klaviyo, how we run email and CRM campaigns and marketing automation, or book a studio walkthrough.
Frequently asked questions
Most Shopify stores should run six core Klaviyo flows: a welcome series for new subscribers, browse abandonment for known visitors who view a product and don't buy, abandoned cart and abandoned checkout for shoppers who leave before finishing, post-purchase after an order, win-back for customers who haven't ordered again in a while, and a sunset flow that cleans out subscribers who have stopped engaging, to protect deliverability.
A campaign goes out once, to a list, on the day you choose, and carries news, launches, and promotions. A flow runs every day for every person who does the thing that triggers it, such as signing up, viewing a product, starting a checkout, buying, or going quiet. Stores need both: campaigns carry the news, while flows carry the journey every customer goes through.
They reach two levels of intent. An abandoned checkout flow is triggered by Started Checkout, when someone has reached checkout, entered their email, and left; it's the highest-intent flow a store runs. An abandoned cart flow uses an Added to Cart metric, if the store sends one to Klaviyo, and reaches people who added a product but never reached checkout. Exclude anyone who started checkout from the cart flow, so nobody gets both.
A welcome series usually sends its first email right away, then three to five more over the next one to two weeks. The first email should deliver whatever the signup form promised, clearly. Later emails introduce the brand: what you make, why it's different, your bestsellers, reviews, and how shipping and returns work. Save the hard sell for later in the series, once people know who you are.
A sunset flow is triggered by a segment of subscribers who haven't opened, clicked, or visited your site in a long time. It sends one to three messages over a week or two, asking honestly whether they still want to hear from you. People who engage stay; people who don't are excluded from regular sending or suppressed. This protects your sender reputation, which affects whether your emails reach everyone else's inbox.


